4. How an oil seal functions
5. Standard seal designs
6. Nonstandard seal designs
7. Seal nomenclature
8. Seal nomenclature definitions
10. How to select the proper seal design
12. Minimum radial cross sections
13. Special helix lip design
14. Rubber covered seals
15. Designs for highly contaminated environments
16. Proper seal selection for system pressure
17. Reverse lip design
17. Isolation dampeners
17. Strut seals
17. Double spring loaded seals to separate two fluids
18. Seal drag vs seal efficiency
18. Applications requiring garter springs
19. Surface speed vs rpm and diameter

22. Selecting the proper elastomer
25. Elastomer/fluid compatibility chart
26. Under lip temperature vs sump temperature
28. Elastomeric metric material list
30. Metal case material/thickness
30. Spring material

31. Shaft
32. Bore
34. Shaft to bore misalignment
34. Dynamic eccentricity
34. Total eccentricity
35. Rubber covered seal installation
35. Use of buttress groove with rubber covered seals

37. How to indicate stainless steel case and spring materials
38. How to indicate a helix lip design
38. Internally lubricated compounds

39. Seal installation bullets
40. Proper seal installation

41. Sealing systems analysis
44. deVries International field failure analysis report